How To Build A Home Easy

http://www.youtube.com/watch?v=TuEIzBhbuNw



























































How To Build A Home Easy

1. Select the location for your home.
2. Select the property you are going to build and buy
in
3. Design your home
4. Has a wealth of research and footprint of the house
located.
5. Obtaining permits for construction
6. Deciding how much to own the actual building work
7. Establishment of building lines.
8. Close your type of flooring you choose.
9. Shape of the walls of your home.
10. Plumb walls and brace them securely
11. Laying out the marks for putting on your roof beams
12. Place each truss in the right location, usually 24 inches
stations
13. Installing Gable diagonal bracing (for the roof and ended Gable) and
prevent the shape of the roof racks when installing roof decking.
14. Nail the fascia board at the small end of each truss or beam, and
outlookers create any assistance Gable and Gable fascia overhang
wood, if used.
15. Deck beams and plywood, boards of central, or nominal
trees such as 1 and 6 inches, tongue and groove boards. I
16. Use felt 15 or 30 pound roof (tar paper), and nail
I mplex
nails, covered caps, plastic cap or cover it with a felting
safe
17. Install siding exterior and exterior features such as windows
and doors.
18. Set your roof last.
19. Worst electric organ.
20. Installation of water pipes, waste drains, and drainage holes
walls
21. Installation of ventilation (in climate and temperature) ducts, air handlers,
and distribution required as a coolant

22. Insulate the walls where it is needed
23. Close your ceilings.
24. Installation, bath shower flower, and any other major
Fixtures and pipes that interface finished walls.
25. Fast and the board on the wall panels or interior walls
26. Put any edge you are using for the baseboards, crown
moldings,
and corners, and set your internal doors and jambs
27. Faulk, paints, wall coverings and installing any walls
required.
28. Cut out the electrical equipment, lighting and other
Fixtures, and install a panel box cutters as they are
not before
installation.
29. Install cabinets and other mill work
30. Installation of pipe fittings, trim them out, and Faulk and seal
where necessary.
31. Installing the floor.
32. Installation hardware, and supplies are turned off, and look
details.
33. Decorate your home, and will remain in